Xenon Weathering Chamber Automatic
Air Cooled Light Fastness Tester Color Fastness To Light
General specifications
Packaging Dimensions: (W x D x H) 1280×1150×2200mm
Power supply source: AC380V±10%, 50/60Hz (can be appointed)
Gross Weight: 400kg
Introduction
This machine designed to meet the requirements of ISO 105 B02 and
AATCC Test Method 16 standards. It has a rotating specimen rack and
provides precise control of critical test parameters including
spectrum, irradiance, relative humidity, chamber temperature and
black standard temperature.
Usage
To determine the resistance of the color of textiles to fade when
exposed to artificial light (xenon arc) which is representative of natural daylight.
Testing standards
ISO 105-B02 Textiles -- Tests for color fastness -- Part B02: Color
fastness to artificial light: Xenon arc fading lamp test
ISO 105-B04 Textiles -- Tests for color fastness -- Part B04: Color
fastness to artificial weathering: Xenon arc fading lamp test
AATCC TM 16 – Option 3 Colorfastness to Light: Xenon-Arc
feature
1. Xenon lamp ventilation and cooling device: The box temperature
ventilation and cooling system adopts Taiwan high temperature
resistant turbo fan to cool down, and the cooling system inside the
box cools down.
2. Light box temperature alarm device: It can monitor the
temperature in the light box through the PT100 high-precision
sensor, monitor the over-temperature alarm and cut off the power
supply of the xenon lamp.
3. The blackboard thermometer adopts wired transmission technology,
which effectively improves the control precision. (Using high
temperature resistant isolation and shielded communication line)
4. Optical fiber transmission is used to measure the radiation
intensity of the xenon lamp to avoid measurement errors caused by
temperature. (optional accessory)
5. A BPT (black panel thermometer) or BST (black standard
thermometer) is mounted on the sample holder.
6. Device: In order to record the working time of each test, the
device is equipped with a timer on the operation panel, which can
control the time of the device, and the device will automatically
shut down after the timer ends.
7. Protection device: In order to make the xenon arc lamp work
normally without damage, when the door is opened, the xenon lamp
will automatically go out and the whole machine will stop working.
Technical parameters
| Internal Dimension (W*D*H) | 600×600×800 |
| External Dimension (W*D*H) | 1220×1100×2100 |
| performance indicators | Chamber temperature | 10～95℃ |
| Temperature accuracy | ±5℃ |
| Black panel temperature | 30～110℃ |
| Chamber humidity range | 15％RH～85％RH |
| Humidity accuracy | ±5％RH |
| Irradiance Range | 420nm |
| Irradiance strength | 0.55～1.3W/m2 |
| Irradiance accuracy | ±0.03W/m2/ |
| Xenon lamp power | 2500W air-cooled xenon arc lamp (recommend replacing lamps every
1200 hours) |
| Rack rotating speed | 5r/min |
| Test Positions | 10 pieces of 145x 45mm, 5 pieces of 145x 75mm |
| Exposure Area of each Test Position | ISO 65.25cm² (145 x 45) mm AATCC 108.75cm² (145 x 75) mm |
| operation control system | water spray system | The water spray time can be set in 999 minutes, and the spray stop
time can be set in 999 minutes |
| Accuracy range | Setting/indication accuracy: temperature 0.1℃, humidity 1%RH |
| Temperature and humidity sensor | Platinum resistance.PT100Ω/MV |
| Heating system | Fully independent system, nickel-chromium alloy electric heating
heater |
| humidification system | External isolation, all stainless steel shallow surface evaporative
humidifier |
| blackboard temperature | Bimetal Blackboard Thermometer |
| circulatory system | Temperature-resistant and low-noise air-conditioning motor.
Multi-blade centrifugal fan |
| material | Internal chamber material | High-quality carbon steel plate, phosphating electrostatic spray
treatment / stainless steel matte line hairline treatment |
| External chamber material | SUS 304 # Stainless Steel, anti-rust |
| Sample holder material | SUS 304 # Stainless Steel, anti-rust |
| Standard accessories | radiation-proof glass windows-1 set, Xenon lamp-1 PC |
| safety protection | Leakage, short circuit, over temperature, water shortage, motor
overheating, overcurrent protection |
| Power supply | AC380V±10％ 50±0.5Hz,13W |
About us
Haida International Equipment Co,Ltd was established in 2004, located in Dongguan city, Guangdong
Province, China, is specialized in production and R&D of
various material physical properties testing equipment. We have our
own independent research and development center and four testing
equipment production lines: textile, footwear, leather, mask. In
2006, textile, footwear, leather mask testing equipment officially
put into production and entered the international market.
Why choose us?
1.Design & Production : Solution Consultation for each order
Recommend the most cost -performance machine
Research & Develop the suitable one for Special- designed Model.
2.Shipping & Delivery: One-Stop Service
Production- Deliver to your door - Installation & Training-
Technical Support
3.Warranty
1 year warranty with lifetime technology support
4.After-Sale Service
React within 2 Hours
Video inspection & on-site service combined
